Dallas Retaining Walls and Fences

Uses Galvanized 2-3/8″ steel post

Nails:1-7/8″ ring shank
For maximum strength

Rails:2″ x 4″ Rails

Side-by-side fence: Provides privacy and security, but wood shrinks leaving gaps. Some visibility through fence.

Board-on-board fence: Privacy No gaps from wood shrinkage.
Pickets overlapped approximately 1-1/2″ on each side of picket.

Gates are double posts for extra strength.
Standard width is 42″ ,

8′ fences will have a header over the gate for added strength and include 4 hinges.
6′ fences will have 3 hinges on gates.

Trim: 1″ x 2″ or 1″ x 4″ picket on the face of the fence to provide a finished top.

Ground board:A 2″ x 6″ treated board set directly on the ground.

Top cap:2″ x 6″ or 2″ x 8″ cedar board on top of the fence.

Stain is available pre-dipped before construction

Permits and Utilities:

Dallas Retaining Walls and Fences follows city and state requirements.
State law requires locating underground utulities before digging.
City permits are also required for all construction.
DRWF will obtain required permits and contact Dig Tess to mark underground lines.

Wood Fence with metal post will last approximately 15-20 years with proper maintenance.

Don't See an image of what you need?

Whether your project is large or small, Please feel free to ask us:

469-396-8546

E-MAIL

mike@dallasretainingwalls.com

Contact us today!
We welcome your questions and inqueries. Please see our Contact Us page for complete contact information.